Clear Casting Resin polyster Based

Clear Casting resin Polyester based

CLEAR CASTING RESIN - POLYSTER – BCC53

TECHNICAL SPECIFICATION

It is two-part epoxy system for casting, coatings, and adhesive applications. It is a range of high- performance user- friendly epoxy resins.

Properties :

FEATURES & BENEFITS:

• High Gloss Finishing.
• Can be Pigmented using suitable pigments.
• Very less shrinkage.
• Excellent moisture protection barrier, stable in acidic pH solutions.
• Excellent flow properties (low viscosity) with efficient substrate wetting.
• Unique mechanical properties.

STORAGE & PRE –MIXING:

The two components ( Resin & hardener ) should be stored in separate at all times prior to use. Store in cool , Dry & Away from Sun Light.

Warm Temperature should be avoided in storage area , Warm temperature reduce the shelf life. The handling equipment & the storage area should be free from chemical residue , Foreign matters.

TECHNICAL GUIDELINES FOR USING:

• Measure the Part A ( Resin ) and the Part B ( Hardener ) in two separate containers.
• Transfer Part A into the suitable Glass Beaker
• Start gentle stirring
• After stirring the part A, transfer Part B to it.
• Continue the gentle stirring & Reaction to progress.
• Take care not to get air trapped within mixture
• The Mixed epoxy resin should be applied or poured within 5-10 min Time.
• For design applications, Degassing may be required to remove the Air bubbles from the texture.
• Upon curing remove the material from moulds.

SHELF LIFE:

Twelve (12) months from date of shipment when stored at 25ºC in the original sealed packages.

FIRST AID:

Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.

Skin Contact: In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops.

Ingestion: Do not induce vomiting unless instructed by a physician. Contact physician immediately.